BHP+10 hp (7%)
Standard
143 hp
Tuned
153 hp
Torque+20 Nm (10%)
Standard
210 Nm
Tuned
230 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowChrysler Sebring 2.4i 143hp ECU Remapping
Considering an ECU remap for your Chrysler Sebring 2.4i 143hp? A Stage 1 remap can take this All petrol engine from 143 BHP to 153 BHP and from 210 Nm to 230 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Sebring can achieve.
How this engine compares
- 5thof 5 Chrysler Sebring engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler Sebring 2.4i 143hp is a 2.4L naturally aspirated petrol engine producing 143 BHP and 210 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 153 BHP and 230 Nm — a gain of around 10 BHP (7%) and 20 Nm (10%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Sebring All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|