BHP+19 hp (12%)
Standard
156 hp
Tuned
175 hp
Torque+20 Nm (11%)
Standard
190 Nm
Tuned
210 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumChrysler Sebring 2.0i 156hp ECU Remapping
Considering an ECU remap for your Chrysler Sebring 2.0i 156hp? A Stage 1 remap can take this All petrol engine from 156 BHP to 175 BHP and from 190 Nm to 210 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Sebring can achieve.
How this engine compares
- 4thof 5 Chrysler Sebring engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler Sebring 2.0i 156hp is a 2.0L naturally aspirated petrol engine producing 156 BHP and 190 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 175 BHP and 210 Nm — a gain of around 19 BHP (12%) and 20 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Sebring All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|