Chrysler PT Cruiser 2.0i 140hp Remap
Expected gains of +10 BHP and +17 Nm torque
Get Your Free Quote ↓BHP+10 hp (7%)
Standard
140 hp
Tuned
150 hp
Torque+17 Nm (9%)
Standard
188 Nm
Tuned
205 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowChrysler PT Cruiser 2.0i 140hp ECU Remapping
Considering an ECU remap for your Chrysler PT Cruiser 2.0i 140hp? A Stage 1 remap can take this 2004 - 2010 petrol engine from 140 BHP to 150 BHP and from 188 Nm to 205 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler PT Cruiser can achieve.
How this engine compares
- 5thof 6 Chrysler PT Cruiser engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 6%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler PT Cruiser 2.0i 140hp is a 2.0L naturally aspirated petrol engine producing 140 BHP and 188 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 205 Nm — a gain of around 10 BHP (7%) and 17 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other PT Cruiser 2004 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|