Chevrolet Captiva 3.0 LTZ 258hp Remap
Expected gains of +12 BHP and +17 Nm torque
Get Your Free Quote ↓BHP+12 hp (5%)
Standard
258 hp
Tuned
270 hp
Torque+17 Nm (6%)
Standard
288 Nm
Tuned
305 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Captiva 3.0 LTZ 258hp ECU Remapping
Considering an ECU remap for your Chevrolet Captiva 3.0 LTZ 258hp? A Stage 1 remap can take this 2011 - 2018 petrol engine from 258 BHP to 270 BHP and from 288 Nm to 305 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Captiva can achieve.
How this engine compares
- 6thof 8 Chevrolet Captiva engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 6%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Captiva 3.0 LTZ 258hp is a 3.0L naturally aspirated petrol engine producing 258 BHP and 288 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 270 BHP and 305 Nm — a gain of around 12 BHP (5%) and 17 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Captiva 2011 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|