Chevrolet Captiva 2.4 LT 167hp Remap
Expected gains of +10 BHP and +15 Nm torque
Get Your Free Quote ↓BHP+10 hp (6%)
Standard
167 hp
Tuned
177 hp
Torque+15 Nm (7%)
Standard
230 Nm
Tuned
245 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Captiva 2.4 LT 167hp ECU Remapping
Considering an ECU remap for your Chevrolet Captiva 2.4 LT 167hp? A Stage 1 remap can take this 2011 - 2018 petrol engine from 167 BHP to 177 BHP and from 230 Nm to 245 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Captiva can achieve.
How this engine compares
- 7thof 8 Chevrolet Captiva engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Captiva 2.4 LT 167hp is a 2.4L naturally aspirated petrol engine producing 167 BHP and 230 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 177 BHP and 245 Nm — a gain of around 10 BHP (6%) and 15 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Captiva 2011 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|