Chevrolet Captiva 2.2 VCDI 184hp Remap
Expected gains of +16 BHP and +30 Nm torque
Get Your Free Quote ↓BHP+16 hp (9%)
Standard
184 hp
Tuned
200 hp
Torque+30 Nm (8%)
Standard
400 Nm
Tuned
430 Nm
Suitability
Moderate (5.5/10)Gains Profile
BalancedHeadroom
LowChevrolet Captiva 2.2 VCDI 184hp ECU Remapping
Considering an ECU remap for your Chevrolet Captiva 2.2 VCDI 184hp? A Stage 1 remap can take this 2011 - 2018 diesel engine from 184 BHP to 200 BHP and from 400 Nm to 430 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Captiva can achieve.
How this engine compares
- 4thof 8 Chevrolet Captiva engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Captiva 2.2 VCDI 184hp is a 2.2L turbocharged diesel engine producing 184 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 430 Nm — a gain of around 16 BHP (9%) and 30 Nm (8%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Captiva 2011 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|