BHP+49 hp (23%)
Standard
211 hp
Tuned
260 hp
Torque+100 Nm (33%)
Standard
300 Nm
Tuned
400 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighAudi Q3 2.0 TFSI 211hp ECU Remapping
Considering an ECU remap for your Audi Q3 2.0 TFSI 211hp? A Stage 1 remap can take this U8 - 2011 - 2015 petrol engine from 211 BHP to 260 BHP and from 300 Nm to 400 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q3 can achieve.
How this engine compares
- 10thof 24 Audi Q3 engines by power gain
- 75%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi Q3 2.0 TFSI 211hp is a 2.0L turbocharged petrol engine producing 211 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 400 Nm — a gain of around 49 BHP (23%) and 100 Nm (33%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.