BHP+70 hp (15%)
Standard
480 hp
Tuned
550 hp
Torque+375 Nm (16%)
Standard
2400 Nm
Tuned
2775 Nm
Suitability
Moderate (5/10)Gains Profile
BalancedHeadroom
MediumVolvo Trucks FM 13 480hp ECU Remapping
Considering an ECU remap for your Volvo Trucks FM 13 480hp? A Stage 1 remap can take this 1e generatie diesel engine from 480 BHP to 550 BHP and from 2400 Nm to 2775 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volvo Trucks FM can achieve.
How this engine compares
- 13thof 13 Volvo Trucks FM engines by power gain
- 92%of the 9,842 engines we hold gain data for see a smaller power increase
- 99%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Volvo Trucks FM 13 480hp is a naturally aspirated unknown fuel type engine producing 480 BHP and 2400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 550 BHP and 2775 Nm — a gain of around 70 BHP (15%) and 375 Nm (16%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.