SsangYong Rexton 2.2 e-XDI 178hp Remap
Expected gains of +42 BHP and +60 Nm torque
Get Your Free Quote ↓BHP+42 hp (24%)
Standard
178 hp
Tuned
220 hp
Torque+60 Nm (15%)
Standard
400 Nm
Tuned
460 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumSsangYong Rexton 2.2 e-XDI 178hp ECU Remapping
Considering an ECU remap for your SsangYong Rexton 2.2 e-XDI 178hp? A Stage 1 remap can take this -> 2016 diesel engine from 178 BHP to 220 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your SsangYong Rexton can achieve.
How this engine compares
- 2ndof 5 SsangYong Rexton engines by power gain
- 69%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The SsangYong Rexton 2.2 e-XDI 178hp is a 2.2L turbocharged diesel engine producing 178 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 460 Nm — a gain of around 42 BHP (24%) and 60 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Rexton -> 2016 Engines
| Engine | BHP | Gain | Torque |
|---|