SsangYong Rexton 2.0 XDi 155hp Remap
Expected gains of +45 BHP and +60 Nm torque
Get Your Free Quote ↓BHP+45 hp (29%)
Standard
155 hp
Tuned
200 hp
Torque+60 Nm (17%)
Standard
360 Nm
Tuned
420 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighSsangYong Rexton 2.0 XDi 155hp ECU Remapping
Considering an ECU remap for your SsangYong Rexton 2.0 XDi 155hp? A Stage 1 remap can take this -> 2016 diesel engine from 155 BHP to 200 BHP and from 360 Nm to 420 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your SsangYong Rexton can achieve.
How this engine compares
- 1stof 5 SsangYong Rexton engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The SsangYong Rexton 2.0 XDi 155hp is a 2.0L turbocharged diesel engine producing 155 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 420 Nm — a gain of around 45 BHP (29%) and 60 Nm (17%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Rexton -> 2016 Engines
| Engine | BHP | Gain | Torque |
|---|