BHP+6 hp (10%)
Standard
61 hp
Tuned
67 hp
Torque+10 Nm (11%)
Standard
92 Nm
Tuned
102 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumSmart ForTwo 1.0i 61hp ECU Remapping
Considering an ECU remap for your Smart ForTwo 1.0i 61hp? A Stage 1 remap can take this -> 2014 petrol engine from 61 BHP to 67 BHP and from 92 Nm to 102 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Smart ForTwo can achieve.
How this engine compares
- 11thof 11 Smart ForTwo engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Smart ForTwo 1.0i 61hp is a 1.0L naturally aspirated petrol engine producing 61 BHP and 92 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 67 BHP and 102 Nm — a gain of around 6 BHP (10%) and 10 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other ForTwo -> 2014 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|