BHP+19 hp (35%)
Standard
54 hp
Tuned
73 hp
Torque+40 Nm (31%)
Standard
130 Nm
Tuned
170 Nm
Suitability
Excellent (8.5/10)Gains Profile
BalancedHeadroom
HighSmart ForTwo 0.8 CDI 54hp ECU Remapping
Considering an ECU remap for your Smart ForTwo 0.8 CDI 54hp? A Stage 1 remap can take this -> 2014 diesel engine from 54 BHP to 73 BHP and from 130 Nm to 170 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Smart ForTwo can achieve.
How this engine compares
- 5thof 11 Smart ForTwo engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Smart ForTwo 0.8 CDI 54hp is a 0.8L turbocharged diesel engine producing 54 BHP and 130 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 73 BHP and 170 Nm — a gain of around 19 BHP (35%) and 40 Nm (31%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other ForTwo -> 2014 Engines
| Engine | BHP | Gain |
|---|