BHP+41 hp (22%)
Standard
184 hp
Tuned
225 hp
Torque+80 Nm (21%)
Standard
380 Nm
Tuned
460 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighSeat Leon 2.0 TDI CR 184hp ECU Remapping
Considering an ECU remap for your Seat Leon 2.0 TDI CR 184hp? A Stage 1 remap can take this 5F MK1 - 2012 - 2017 diesel engine from 184 BHP to 225 BHP and from 380 Nm to 460 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Leon can achieve.
How this engine compares
- 26thof 73 Seat Leon engines by power gain
- 69%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Leon 2.0 TDI CR 184hp is a 2.0L turbocharged diesel engine producing 184 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 460 Nm — a gain of around 41 BHP (22%) and 80 Nm (21%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Leon 5F MK1 - 2012 - 2017 Engines
| Engine | BHP | Gain |
|---|