BHP+42 hp (29%)
Standard
143 hp
Tuned
185 hp
Torque+80 Nm (25%)
Standard
320 Nm
Tuned
400 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighSeat Exeo 2.0 TDI CR 143hp ECU Remapping
Considering an ECU remap for your Seat Exeo 2.0 TDI CR 143hp? A Stage 1 remap can take this 2009 -> diesel engine from 143 BHP to 185 BHP and from 320 Nm to 400 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Exeo can achieve.
How this engine compares
- 7thof 10 Seat Exeo engines by power gain
- 69%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Exeo 2.0 TDI CR 143hp is a 2.0L turbocharged diesel engine producing 143 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 400 Nm — a gain of around 42 BHP (29%) and 80 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other Exeo 2009 -> Engines
| Engine | BHP | Gain |
|---|