BHP+60 hp (50%)
Standard
120 hp
Tuned
180 hp
Torque+110 Nm (38%)
Standard
290 Nm
Tuned
400 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighSeat Exeo 2.0 TDI CR 120hp ECU Remapping
Considering an ECU remap for your Seat Exeo 2.0 TDI CR 120hp? A Stage 1 remap can take this 2009 -> diesel engine from 120 BHP to 180 BHP and from 290 Nm to 400 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Exeo can achieve.
How this engine compares
- 2ndof 10 Seat Exeo engines by power gain
- 86%of the 9,842 engines we hold gain data for see a smaller power increase
- 85%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Exeo 2.0 TDI CR 120hp is a 2.0L turbocharged diesel engine producing 120 BHP and 290 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 400 Nm — a gain of around 60 BHP (50%) and 110 Nm (38%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.