BHP+35 hp (18%)
Standard
190 hp
Tuned
225 hp
Torque+80 Nm (20%)
Standard
400 Nm
Tuned
480 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumSaab 45905 2.0 TTiD 190hp ECU Remapping
Considering an ECU remap for your Saab 45905 2.0 TTiD 190hp? A Stage 1 remap can take this 2010 - 2011 diesel engine from 190 BHP to 225 BHP and from 400 Nm to 480 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Saab 45905 can achieve.
How this engine compares
- 9thof 23 Saab 45905 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Saab 45905 2.0 TTiD 190hp is a 2.0L turbocharged diesel engine producing 190 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 480 Nm — a gain of around 35 BHP (18%) and 80 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 45905 2010 - 2011 Engines
| Engine | BHP | Gain | Torque |
|---|