BHP+4 hp (5%)
Standard
73 hp
Tuned
77 hp
Torque+26 Nm (27%)
Standard
95 Nm
Tuned
121 Nm
Suitability
Moderate (5/10)Gains Profile
Torque-focusedHeadroom
MediumRenault Twingo 1.0 SCe 73hp ECU Remapping
Considering an ECU remap for your Renault Twingo 1.0 SCe 73hp? A Stage 1 remap can take this III - 2019 -> petrol engine from 73 BHP to 77 BHP and from 95 Nm to 121 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Twingo can achieve.
How this engine compares
- 13thof 13 Renault Twingo engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Twingo 1.0 SCe 73hp is a 1.0L naturally aspirated petrol engine producing 73 BHP and 95 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 77 BHP and 121 Nm — a gain of around 4 BHP (5%) and 26 Nm (27%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.