BHP+30 hp (17%)
Standard
180 hp
Tuned
210 hp
Torque+80 Nm (20%)
Standard
400 Nm
Tuned
480 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumRenault Master 2.3 DCi 180hp ECU Remapping
Considering an ECU remap for your Renault Master 2.3 DCi 180hp? A Stage 1 remap can take this Mk5 - 2019 -> diesel engine from 180 BHP to 210 BHP and from 400 Nm to 480 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Master can achieve.
How this engine compares
- 16thof 29 Renault Master engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Master 2.3 DCi 180hp is a 2.3L turbocharged diesel engine producing 180 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 480 Nm — a gain of around 30 BHP (17%) and 80 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Master Mk5 - 2019 -> Engines
| Engine | BHP | Gain |
|---|