BHP+65 hp (45%)
Standard
145 hp
Tuned
210 hp
Torque+80 Nm (22%)
Standard
360 Nm
Tuned
440 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighRenault Master 2.3 DCi 145hp ECU Remapping
Considering an ECU remap for your Renault Master 2.3 DCi 145hp? A Stage 1 remap can take this Mk5 - 2019 -> diesel engine from 145 BHP to 210 BHP and from 360 Nm to 440 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Master can achieve.
How this engine compares
- 2ndof 29 Renault Master engines by power gain
- 90%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Master 2.3 DCi 145hp is a 2.3L turbocharged diesel engine producing 145 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 440 Nm — a gain of around 65 BHP (45%) and 80 Nm (22%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Master Mk5 - 2019 -> Engines
| Engine | BHP | Gain | Torque |
|---|