BHP+21 hp (9%)
Standard
224 hp
Tuned
245 hp
Torque+27 Nm (9%)
Standard
298 Nm
Tuned
325 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowPontiac G6 3.5 V6 224hp ECU Remapping
Considering an ECU remap for your Pontiac G6 3.5 V6 224hp? A Stage 1 remap can take this 2004 - 2010 petrol engine from 224 BHP to 245 BHP and from 298 Nm to 325 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Pontiac G6 can achieve.
How this engine compares
- 1stof 4 Pontiac G6 engines by power gain
- 24%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Pontiac G6 3.5 V6 224hp is a 3.5L naturally aspirated petrol engine producing 224 BHP and 298 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 245 BHP and 325 Nm — a gain of around 21 BHP (9%) and 27 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other G6 2004 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|