BHP+18 hp (11%)
Standard
167 hp
Tuned
185 hp
Torque+25 Nm (11%)
Standard
220 Nm
Tuned
245 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumPontiac G6 2.4i 167hp ECU Remapping
Considering an ECU remap for your Pontiac G6 2.4i 167hp? A Stage 1 remap can take this 2004 - 2010 petrol engine from 167 BHP to 185 BHP and from 220 Nm to 245 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Pontiac G6 can achieve.
How this engine compares
- 4thof 4 Pontiac G6 engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Pontiac G6 2.4i 167hp is a 2.4L naturally aspirated petrol engine producing 167 BHP and 220 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 245 Nm — a gain of around 18 BHP (11%) and 25 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other G6 2004 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|