Peugeot 308 1.2T Puretech 130hp Remap
Expected gains of +15 BHP and +30 Nm torque
Get Your Free Quote ↓BHP+15 hp (12%)
Standard
130 hp
Tuned
145 hp
Torque+30 Nm (13%)
Standard
230 Nm
Tuned
260 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumPeugeot 308 1.2T Puretech 130hp ECU Remapping
Considering an ECU remap for your Peugeot 308 1.2T Puretech 130hp? A Stage 1 remap can take this 2021 -> petrol engine from 130 BHP to 145 BHP and from 230 Nm to 260 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 308 can achieve.
How this engine compares
- 38thof 44 Peugeot 308 engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 308 1.2T Puretech 130hp is a 1.2L turbocharged petrol engine producing 130 BHP and 230 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 260 Nm — a gain of around 15 BHP (12%) and 30 Nm (13%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 308 2021 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|