Peugeot 308 GTI 1.6 e-THP 263hp Remap
Expected gains of +32 BHP and +40 Nm torque
Get Your Free Quote ↓BHP+32 hp (12%)
Standard
263 hp
Tuned
295 hp
Torque+40 Nm (12%)
Standard
340 Nm
Tuned
380 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumPeugeot 308 GTI 1.6 e-THP 263hp ECU Remapping
Considering an ECU remap for your Peugeot 308 GTI 1.6 e-THP 263hp? A Stage 1 remap can take this 2017 - 2020 petrol engine from 263 BHP to 295 BHP and from 340 Nm to 380 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 308 can achieve.
How this engine compares
- 15thof 44 Peugeot 308 engines by power gain
- 51%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 308 GTI 1.6 e-THP 263hp is a 1.6L turbocharged petrol engine producing 263 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 380 Nm — a gain of around 32 BHP (12%) and 40 Nm (12%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 308 2017 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|