BHP+40 hp (40%)
Standard
100 hp
Tuned
140 hp
Torque+50 Nm (20%)
Standard
250 Nm
Tuned
300 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighPeugeot 308 1.5 BlueHDi 100hp ECU Remapping
Considering an ECU remap for your Peugeot 308 1.5 BlueHDi 100hp? A Stage 1 remap can take this 2017 - 2020 diesel engine from 100 BHP to 140 BHP and from 250 Nm to 300 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 308 can achieve.
How this engine compares
- 6thof 44 Peugeot 308 engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 308 1.5 BlueHDi 100hp is a 1.5L turbocharged diesel engine producing 100 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 300 Nm — a gain of around 40 BHP (40%) and 50 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 308 2017 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 BlueHDI 100hp | 100 → 130 | +30 |