BHP+5 hp (4%)
Standard
115 hp
Tuned
120 hp
Torque+10 Nm (7%)
Standard
150 Nm
Tuned
160 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowPeugeot 301 1.6 VTi 115hp ECU Remapping
Considering an ECU remap for your Peugeot 301 1.6 VTi 115hp? A Stage 1 remap can take this 2017 -> ... petrol engine from 115 BHP to 120 BHP and from 150 Nm to 160 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 301 can achieve.
How this engine compares
- 3rdof 3 Peugeot 301 engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 301 1.6 VTi 115hp is a 1.6L naturally aspirated petrol engine producing 115 BHP and 150 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 160 Nm — a gain of around 5 BHP (4%) and 10 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 301 2017 -> ... Engines
| Engine | BHP | Gain | Torque | Gain |
|---|