BHP+30 hp (30%)
Standard
100 hp
Tuned
130 hp
Torque+66 Nm (26%)
Standard
254 Nm
Tuned
320 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighPeugeot 301 1.6 BlueHDI 100hp ECU Remapping
Considering an ECU remap for your Peugeot 301 1.6 BlueHDI 100hp? A Stage 1 remap can take this 2017 -> ... diesel engine from 100 BHP to 130 BHP and from 254 Nm to 320 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 301 can achieve.
How this engine compares
- 1stof 3 Peugeot 301 engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 301 1.6 BlueHDI 100hp is a 1.6L turbocharged diesel engine producing 100 BHP and 254 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 320 Nm — a gain of around 30 BHP (30%) and 66 Nm (26%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other 301 2017 -> ... Engines
| Engine | BHP | Gain |
|---|