Peugeot 3008 2.0 HDI Hybrid4 200hp Remap
Expected gains of +30 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+30 hp (15%)
Standard
200 hp
Tuned
230 hp
Torque+50 Nm (11%)
Standard
450 Nm
Tuned
500 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumPeugeot 3008 2.0 HDI Hybrid4 200hp ECU Remapping
Considering an ECU remap for your Peugeot 3008 2.0 HDI Hybrid4 200hp? A Stage 1 remap can take this 2013 - 2016 diesel hybrid engine from 200 BHP to 230 BHP and from 450 Nm to 500 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 3008 can achieve.
How this engine compares
- 10thof 29 Peugeot 3008 engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 3008 2.0 HDI Hybrid4 200hp is a 2.0L turbocharged diesel hybrid engine producing 200 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 500 Nm — a gain of around 30 BHP (15%) and 50 Nm (11%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 3008 2013 - 2016 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|