Peugeot 3008 1.2 Puretech 130hp Remap
Expected gains of +15 BHP and +40 Nm torque
Get Your Free Quote ↓BHP+15 hp (12%)
Standard
130 hp
Tuned
145 hp
Torque+40 Nm (17%)
Standard
230 Nm
Tuned
270 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumPeugeot 3008 1.2 Puretech 130hp ECU Remapping
Considering an ECU remap for your Peugeot 3008 1.2 Puretech 130hp? A Stage 1 remap can take this 2013 - 2016 petrol engine from 130 BHP to 145 BHP and from 230 Nm to 270 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 3008 can achieve.
How this engine compares
- 27thof 29 Peugeot 3008 engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 3008 1.2 Puretech 130hp is a 1.2L turbocharged petrol engine producing 130 BHP and 230 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 270 Nm — a gain of around 15 BHP (12%) and 40 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 3008 2013 - 2016 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|