Peugeot 2008 1.5 BlueHDi 130hp Remap
Expected gains of +25 BHP and +60 Nm torque
Get Your Free Quote ↓BHP+25 hp (19%)
Standard
130 hp
Tuned
155 hp
Torque+60 Nm (20%)
Standard
300 Nm
Tuned
360 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumPeugeot 2008 1.5 BlueHDi 130hp ECU Remapping
Considering an ECU remap for your Peugeot 2008 1.5 BlueHDi 130hp? A Stage 1 remap can take this 2019 -> diesel engine from 130 BHP to 155 BHP and from 300 Nm to 360 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 2008 can achieve.
How this engine compares
- 13thof 23 Peugeot 2008 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 2008 1.5 BlueHDi 130hp is a 1.5L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 360 Nm — a gain of around 25 BHP (19%) and 60 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 2008 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.2 Puretech 100hp | 100 → 150 |