Peugeot 2008 1.5 BlueHDi 102hp Remap
Expected gains of +38 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+38 hp (37%)
Standard
102 hp
Tuned
140 hp
Torque+50 Nm (20%)
Standard
250 Nm
Tuned
300 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighPeugeot 2008 1.5 BlueHDi 102hp ECU Remapping
Considering an ECU remap for your Peugeot 2008 1.5 BlueHDi 102hp? A Stage 1 remap can take this 2019 -> diesel engine from 102 BHP to 140 BHP and from 250 Nm to 300 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 2008 can achieve.
How this engine compares
- 5thof 23 Peugeot 2008 engines by power gain
- 61%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 2008 1.5 BlueHDi 102hp is a 1.5L turbocharged diesel engine producing 102 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 300 Nm — a gain of around 38 BHP (37%) and 50 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 2008 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.2 Puretech 100hp | 100 → 150 | +50 |