BHP+50 hp (36%)
Standard
140 hp
Tuned
190 hp
Torque+50 Nm (14%)
Standard
350 Nm
Tuned
400 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighOpel Insignia 2.0 CDTi 140hp ECU Remapping
Considering an ECU remap for your Opel Insignia 2.0 CDTi 140hp? A Stage 1 remap can take this 2013 - 2015 diesel engine from 140 BHP to 190 BHP and from 350 Nm to 400 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Insignia can achieve.
How this engine compares
- 7thof 41 Opel Insignia engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Insignia 2.0 CDTi 140hp is a 2.0L turbocharged diesel engine producing 140 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 400 Nm — a gain of around 50 BHP (36%) and 50 Nm (14%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Insignia 2013 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CDTi 110hp | 110 → 190 | +80 |