BHP+70 hp (58%)
Standard
120 hp
Tuned
190 hp
Torque+100 Nm (33%)
Standard
300 Nm
Tuned
400 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighOpel Insignia 2.0 CDTi 120hp ECU Remapping
Considering an ECU remap for your Opel Insignia 2.0 CDTi 120hp? A Stage 1 remap can take this 2013 - 2015 diesel engine from 120 BHP to 190 BHP and from 300 Nm to 400 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Insignia can achieve.
How this engine compares
- 3rdof 41 Opel Insignia engines by power gain
- 92%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Insignia 2.0 CDTi 120hp is a 2.0L turbocharged diesel engine producing 120 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 400 Nm — a gain of around 70 BHP (58%) and 100 Nm (33%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Insignia 2013 - 2015 Engines
| Engine | BHP | Gain |
|---|