Opel Insignia 2.8 OPC V6 Turbo 325hp Remap
Expected gains of +35 BHP and +115 Nm torque
Get Your Free Quote ↓BHP+35 hp (11%)
Standard
325 hp
Tuned
360 hp
Torque+115 Nm (26%)
Standard
435 Nm
Tuned
550 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumOpel Insignia 2.8 OPC V6 Turbo 325hp ECU Remapping
Considering an ECU remap for your Opel Insignia 2.8 OPC V6 Turbo 325hp? A Stage 1 remap can take this 2008 - 2013 petrol engine from 325 BHP to 360 BHP and from 435 Nm to 550 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Insignia can achieve.
How this engine compares
- 18thof 41 Opel Insignia engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 87%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Insignia 2.8 OPC V6 Turbo 325hp is a 2.8L turbocharged petrol engine producing 325 BHP and 435 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 550 Nm — a gain of around 35 BHP (11%) and 115 Nm (26%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.