BHP+10 hp (9%)
Standard
115 hp
Tuned
125 hp
Torque+20 Nm (13%)
Standard
155 Nm
Tuned
175 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumOpel Insignia 1.6i 115hp ECU Remapping
Considering an ECU remap for your Opel Insignia 1.6i 115hp? A Stage 1 remap can take this 2008 - 2013 petrol engine from 115 BHP to 125 BHP and from 155 Nm to 175 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Insignia can achieve.
How this engine compares
- 38thof 41 Opel Insignia engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Insignia 1.6i 115hp is a 1.6L naturally aspirated petrol engine producing 115 BHP and 155 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 125 BHP and 175 Nm — a gain of around 10 BHP (9%) and 20 Nm (13%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Insignia 2008 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|