BHP+9 hp (10%)
Standard
87 hp
Tuned
96 hp
Torque+12 Nm (9%)
Standard
130 Nm
Tuned
142 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowOpel Adam 1.4i 16v 87hp ECU Remapping
Considering an ECU remap for your Opel Adam 1.4i 16v 87hp? A Stage 1 remap can take this 2013 -> petrol engine from 87 BHP to 96 BHP and from 130 Nm to 142 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Adam can achieve.
How this engine compares
- 5thof 6 Opel Adam engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Adam 1.4i 16v 87hp is a 1.4L naturally aspirated petrol engine producing 87 BHP and 130 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 96 BHP and 142 Nm — a gain of around 9 BHP (10%) and 12 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Adam 2013 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|