BHP+7 hp (10%)
Standard
68 hp
Tuned
75 hp
Torque+10 Nm (9%)
Standard
115 Nm
Tuned
125 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowOpel Adam 1.2i 16v 68hp ECU Remapping
Considering an ECU remap for your Opel Adam 1.2i 16v 68hp? A Stage 1 remap can take this 2013 -> petrol engine from 68 BHP to 75 BHP and from 115 Nm to 125 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Adam can achieve.
How this engine compares
- 6thof 6 Opel Adam engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Adam 1.2i 16v 68hp is a 1.2L naturally aspirated petrol engine producing 68 BHP and 115 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 75 BHP and 125 Nm — a gain of around 7 BHP (10%) and 10 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Adam 2013 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|