BHP+37 hp (21%)
Standard
173 hp
Tuned
210 hp
Torque+90 Nm (25%)
Standard
360 Nm
Tuned
450 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighNissan X-Trail 2.0 DCi 173hp ECU Remapping
Considering an ECU remap for your Nissan X-Trail 2.0 DCi 173hp? A Stage 1 remap can take this -> 2014 diesel engine from 173 BHP to 210 BHP and from 360 Nm to 450 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan X-Trail can achieve.
How this engine compares
- 1stof 12 Nissan X-Trail engines by power gain
- 60%of the 9,842 engines we hold gain data for see a smaller power increase
- 74%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan X-Trail 2.0 DCi 173hp is a 2.0L turbocharged diesel engine producing 173 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 450 Nm — a gain of around 37 BHP (21%) and 90 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other X-Trail -> 2014 Engines
| Engine | BHP | Gain |
|---|