Nissan Juke 1.6 Turbo Nismo RS 218hp Remap
Expected gains of +12 BHP and +70 Nm torque
Get Your Free Quote ↓BHP+12 hp (6%)
Standard
218 hp
Tuned
230 hp
Torque+70 Nm (25%)
Standard
280 Nm
Tuned
350 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumNissan Juke 1.6 Turbo Nismo RS 218hp ECU Remapping
Considering an ECU remap for your Nissan Juke 1.6 Turbo Nismo RS 218hp? A Stage 1 remap can take this 2010 - 2019 petrol engine from 218 BHP to 230 BHP and from 280 Nm to 350 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Juke can achieve.
How this engine compares
- 6thof 7 Nissan Juke engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Juke 1.6 Turbo Nismo RS 218hp is a 1.6L turbocharged petrol engine producing 218 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 350 Nm — a gain of around 12 BHP (6%) and 70 Nm (25%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Juke 2010 - 2019 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|