BHP+28 hp (25%)
Standard
110 hp
Tuned
138 hp
Torque+70 Nm (29%)
Standard
240 Nm
Tuned
310 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighNissan Juke 1.5 DCi 110hp ECU Remapping
Considering an ECU remap for your Nissan Juke 1.5 DCi 110hp? A Stage 1 remap can take this 2010 - 2019 diesel engine from 110 BHP to 138 BHP and from 240 Nm to 310 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Juke can achieve.
How this engine compares
- 4thof 7 Nissan Juke engines by power gain
- 37%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Juke 1.5 DCi 110hp is a 1.5L turbocharged diesel engine producing 110 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 138 BHP and 310 Nm — a gain of around 28 BHP (25%) and 70 Nm (29%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Juke 2010 - 2019 Engines
| Engine | BHP | Gain |
|---|