Nissan Cabstar / NT400 3.0 TD 110hp Remap
Expected gains of +20 BHP and +28 Nm torque
Get Your Free Quote ↓BHP+20 hp (18%)
Standard
110 hp
Tuned
130 hp
Torque+28 Nm (10%)
Standard
276 Nm
Tuned
304 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumNissan Cabstar / NT400 3.0 TD 110hp ECU Remapping
Considering an ECU remap for your Nissan Cabstar / NT400 3.0 TD 110hp? A Stage 1 remap can take this All diesel engine from 110 BHP to 130 BHP and from 276 Nm to 304 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Cabstar / NT400 can achieve.
How this engine compares
- 6thof 6 Nissan Cabstar / NT400 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Cabstar / NT400 3.0 TD 110hp is a 3.0L turbocharged diesel engine producing 110 BHP and 276 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 304 Nm — a gain of around 20 BHP (18%) and 28 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Cabstar / NT400 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 DCi 100hp | 100 → 130 | +30 |