Nissan Cabstar / NT400 2.5 DCi 120hp Remap
Expected gains of +28 BHP and +68 Nm torque
Get Your Free Quote ↓BHP+28 hp (23%)
Standard
120 hp
Tuned
148 hp
Torque+68 Nm (23%)
Standard
300 Nm
Tuned
368 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighNissan Cabstar / NT400 2.5 DCi 120hp ECU Remapping
Considering an ECU remap for your Nissan Cabstar / NT400 2.5 DCi 120hp? A Stage 1 remap can take this All diesel engine from 120 BHP to 148 BHP and from 300 Nm to 368 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Cabstar / NT400 can achieve.
How this engine compares
- 5thof 6 Nissan Cabstar / NT400 engines by power gain
- 37%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Cabstar / NT400 2.5 DCi 120hp is a 2.5L turbocharged diesel engine producing 120 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 148 BHP and 368 Nm — a gain of around 28 BHP (23%) and 68 Nm (23%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Cabstar / NT400 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 DCi 100hp | 100 → 130 |