BHP+15 hp (11%)
Standard
140 hp
Tuned
155 hp
Torque+40 Nm (15%)
Standard
260 Nm
Tuned
300 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumMitsubishi ASX 1.3 DI-T 140hp ECU Remapping
Considering an ECU remap for your Mitsubishi ASX 1.3 DI-T 140hp? A Stage 1 remap can take this 2022 -> ... petrol mhev engine from 140 BHP to 155 BHP and from 260 Nm to 300 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi ASX can achieve.
How this engine compares
- 9thof 10 Mitsubishi ASX engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mitsubishi ASX 1.3 DI-T 140hp is a 1.3L naturally aspirated petrol mhev engine producing 140 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 300 Nm — a gain of around 15 BHP (11%) and 40 Nm (15%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other ASX 2022 -> ... Engines
| Engine | BHP | Gain | Torque | Gain |
|---|