BHP+18 hp (10%)
Standard
182 hp
Tuned
200 hp
Torque+25 Nm (9%)
Standard
285 Nm
Tuned
310 Nm
Suitability
Moderate (5.5/10)Gains Profile
BalancedHeadroom
LowMG 6 1.5T 182hp ECU Remapping
Considering an ECU remap for your MG 6 1.5T 182hp? A Stage 1 remap can take this 2011 -> petrol engine from 182 BHP to 200 BHP and from 285 Nm to 310 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MG 6 can achieve.
How this engine compares
- 4thof 4 MG 6 engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The MG 6 1.5T 182hp is a 1.5L turbocharged petrol engine producing 182 BHP and 285 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 310 Nm — a gain of around 18 BHP (10%) and 25 Nm (9%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 6 2011 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|