BHP+31 hp (18%)
Standard
169 hp
Tuned
200 hp
Torque+40 Nm (16%)
Standard
250 Nm
Tuned
290 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumMG 6 1.5T 169hp ECU Remapping
Considering an ECU remap for your MG 6 1.5T 169hp? A Stage 1 remap can take this 2011 -> petrol engine from 169 BHP to 200 BHP and from 250 Nm to 290 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MG 6 can achieve.
How this engine compares
- 1stof 4 MG 6 engines by power gain
- 50%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The MG 6 1.5T 169hp is a 1.5L turbocharged petrol engine producing 169 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 290 Nm — a gain of around 31 BHP (18%) and 40 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 6 2011 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|