BHP+25 hp (9%)
Standard
265 hp
Tuned
290 hp
Torque+80 Nm (13%)
Standard
620 Nm
Tuned
700 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumMercedes-Benz R 350 CDI 265hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz R 350 CDI 265hp? A Stage 1 remap can take this 2010 - 2013 diesel engine from 265 BHP to 290 BHP and from 620 Nm to 700 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz R can achieve.
How this engine compares
- 9thof 14 Mercedes-Benz R engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz R 350 CDI 265hp is a 3.0L turbocharged diesel engine producing 265 BHP and 620 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 700 Nm — a gain of around 25 BHP (9%) and 80 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other R 2010 - 2013 Engines
| Engine | BHP | Gain |
|---|