BHP+18 hp (7%)
Standard
272 hp
Tuned
290 hp
Torque+30 Nm (9%)
Standard
350 Nm
Tuned
380 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowMercedes-Benz R 350 272hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz R 350 272hp? A Stage 1 remap can take this 2010 - 2013 petrol engine from 272 BHP to 290 BHP and from 350 Nm to 380 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz R can achieve.
How this engine compares
- 14thof 14 Mercedes-Benz R engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz R 350 272hp is a 3.5L naturally aspirated petrol engine producing 272 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 380 Nm — a gain of around 18 BHP (7%) and 30 Nm (9%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other R 2010 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|