BHP+34 hp (22%)
Standard
156 hp
Tuned
190 hp
Torque+80 Nm (20%)
Standard
400 Nm
Tuned
480 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighMercedes-Benz G 270 CDI 156hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz G 270 CDI 156hp? A Stage 1 remap can take this -> 2017 diesel engine from 156 BHP to 190 BHP and from 400 Nm to 480 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz G can achieve.
How this engine compares
- 18thof 19 Mercedes-Benz G engines by power gain
- 53%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz G 270 CDI 156hp is a 2.7L turbocharged diesel engine producing 156 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 480 Nm — a gain of around 34 BHP (22%) and 80 Nm (20%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other G -> 2017 Engines
| Engine | BHP | Gain |
|---|