BHP+33 hp (19%)
Standard
177 hp
Tuned
210 hp
Torque+80 Nm (20%)
Standard
400 Nm
Tuned
480 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumMercedes-Benz E 270 CDI 177hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 270 CDI 177hp? A Stage 1 remap can take this W211 - 2002 - 2006 diesel engine from 177 BHP to 210 BHP and from 400 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 66thof 102 Mercedes-Benz E engines by power gain
- 52%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 270 CDI 177hp is a 2.7L turbocharged diesel engine producing 177 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 480 Nm — a gain of around 33 BHP (19%) and 80 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.