BHP+40 hp (29%)
Standard
136 hp
Tuned
176 hp
Torque+50 Nm (16%)
Standard
315 Nm
Tuned
365 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighMercedes-Benz E 220 CDI 136hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 220 CDI 136hp? A Stage 1 remap can take this W210 - 1998 - 2002 diesel engine from 136 BHP to 176 BHP and from 315 Nm to 365 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 43rdof 102 Mercedes-Benz E engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 220 CDI 136hp is a 2.1L turbocharged diesel engine producing 136 BHP and 315 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 176 BHP and 365 Nm — a gain of around 40 BHP (29%) and 50 Nm (16%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other E W210 - 1998 - 2002 Engines
| Engine | BHP | Gain |
|---|