BHP+15 hp (7%)
Standard
218 hp
Tuned
233 hp
Torque+40 Nm (9%)
Standard
450 Nm
Tuned
490 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowMercedes-Benz CLA 250e 218hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz CLA 250e 218hp? A Stage 1 remap can take this C118 - 2019 -> petrol phev engine from 218 BHP to 233 BHP and from 450 Nm to 490 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz CLA can achieve.
How this engine compares
- 29thof 30 Mercedes-Benz CLA engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz CLA 250e 218hp is a 1.3L naturally aspirated petrol phev engine producing 218 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 233 BHP and 490 Nm — a gain of around 15 BHP (7%) and 40 Nm (9%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other CLA C118 - 2019 -> Engines
| Engine |
|---|